Home Use Generator: Things You May Want to Know

Of generator in use or storage generator after break-in, maintenance method is as follows: 1)
。
Replace or clean lubricating oil filter cartridge 2)
。
3) change engine oil
。
To tighten the screw and bolt at each part 4)
。

Clean or replace the air filter generator maintenance skills: 1)
。

Work generator diesel engine or spare no matter, want to cover the tank filler cap, lest dirt and dust into the tank.
2)
。

Working 500 h, cleaning tank and piping, clear the carbon deposit on the injector matching parts, injection pressure of calibration, inspection spray atomization quality;
3)
。

Generating set general every work of 100 h, clean diesel generating sets of diesel engine diesel filter once;
4)
。
Diesel injection again after purification by precipitation tank;
5)
。

Oil pipe connection and sealing surface should not have leakage;
6)
。

After disassembling or spare generator used for the first time for a long time, want to let out the air in the oil.

Deflated method: open the fuel switch, loosen the vent screw on the fuel injection pump.

If there is air in the oil, it have bubbles, stay bubbles at normal flow of oil, gas has been put, tighten vent screw again.

In addition, the new generator should try to avoid the sudden increase load or high-speed operation, as far as possible use the manufacturers recommended lubricating oil, different type of oil do not mix, containing various additives in lubricating oil, mix the different type of oil will make lubrication performance degradation, leading to the moving parts of abnormal wear.

To the fuel tank oil, oil filter, mouth on filter cloth is better;

Fuel in the tank first stand for more than 24 hours, the water and impurities precipitation after use;

At ordinary times should often open the drain plug head of daily-use oil tank at the bottom of the discharge of water and sediment.
FUZHOU JET ELECTRIC MACHINERY CO., LTD is specialized in sourcing generator manufacturers power equipment through its unparalleled worldwide network of supply. Go to Jet Power Generator, you will surely find your ideal at the most favorable price.
Compare the various types of that are available. At Jet Power Generator, the range is constantly being updated with new models, technical details and competitive prices.
There are so many factors that businesses have to weigh when producing power equipment wholesale, and we are not going to pretend to grasp all of them.

(
1)

High temperature protection water temperature sensors installed on the cooling water outlet pipe, the water temperature gauge on the meter indicates the NT series diesel engine cooling water temperature of cooling water temperature is normal (
74 ~ 91)
℃.

When the cooling water temperature higher than 106 ℃, the temperature t close contact, through intermediate relay circuit of Q3, Q3 electricity or absorption, and through its own auxiliary contacts Q3 self-locking, Q3 normally closed off contact Lord, fuel shut-off solenoid valve FSV circuit, FSV release, fuel oil supply oil truncated, automatic stop of diesel generators, and protection.
（
2)

Low oil pressure protection NT series diesel engine lube oil pressure of the road, when idle for (
34.
3-137)
Is 274 kPa, rated speed.
4-519.
4)
kPa。

If oil pressure is too low, poor lubrication can make the moving parts, even without lubrication, wear, shorten service life.

Therefore, this unit has the function of low oil pressure protection.

Oil pressure by oil pressure sensor for testing, P dashboard oil pressure gauge indicates the high and low oil pressure.

Uranium when oil pressure is lower than 127 kpa pressure relay released, their contact P disconnect, fuel shut-off solenoid valve FSV circuit, FSV release, fuel oil supply oil truncated, automatic stop of diesel generators, the same protection.
（
3)

Overspeed protection on diesel engine operation process, if there is a speeding, namely the speed higher than 1725 r/min, the speed of electronic switching circuit to detect the speed signal, at this point, the relay IRC and speeding, the normally closed contact IRC disconnect, fuel shut-off solenoid valve FSV power circuit, so as to cut off fuel pathway, diesel engine automatic stop.
FUZHOU JET ELECTRIC MACHINERY CO., LTD shows how effective market design can encourage participation, reduce gaming, and aggregate information, in order to improve liquidity, efficiency, and equity in markets.
Jet Power is also committed to maintaining excellence, respect, and integrity in all aspects of our operations and our professional and business conduct.
As a top provider of products, FUZHOU JET ELECTRIC MACHINERY CO., LTD will surely meet your urgent need for power equipment solutions. Go to Jet Power Generator.
Overwhelming customers with too much information or the slew of benefits power equipment wholesale provides–even if they're all valid–is a surefire way to lose their attention.